Speco Technologies & IP-WDRB1 Manual do Utilizador

1 IP Camera User’s Manual Speco Technologies IP Camera User’s Manual (Version 1.3.2) IP-INTB1 & IP-INTB2 & IP-WDRB1 Network Bullet

10 IP Camera User’s Manual Speco Technologies 3) Traditional Camera 3) Speed Dome Camera 1) Power Port: Power connecti

100 IP Camera User’s Manual Speco Technologies Fig. 5―4 IP Check After finding IP, double-click IP of THE CAMERA to go to the editable Mode as f

101 IP Camera User’s Manual Speco Technologies 5.4. Use of Service Server Run Web Browser and input http://ipcam4u.net in URL and click ‘Enter’, t

102 IP Camera User’s Manual Speco Technologies 5.4.1. User Registration Fig. 5―7 User Login Click ‘Register Now’ in [5-7]. Fig. 5―8 Agreeme

103 IP Camera User’s Manual Speco Technologies Read the Agreement carefully and click ‘Agree’ in case to agree, and go to the next page. Fig. 5―

104 IP Camera User’s Manual Speco Technologies and password on [5-7] to connect to Service Server. Fig. 5―11 Service Server Log-in Succeeded 5.4

105 IP Camera User’s Manual Speco Technologies knowing IP address of THE CAMERA. Domain Name must be unique. Register after checking if it is dup

106 IP Camera User’s Manual Speco Technologies Fig. 5―14 Camera List [5-14] shows the registered List of THE CAMERA. Upon clicking on ‘Camer

107 IP Camera User’s Manual Speco Technologies Fig. 5―16 Alarm Log List ‘Alarm Log List’ shows the information of a channel, alarmed time, typ

108 IP Camera User’s Manual Speco Technologies Fig. 5―17 Change User’s Information Save User’s information by clicking ‘To Change Information’ af

109 IP Camera User’s Manual Speco Technologies Fig. 5―19 Search Camera If user want to see information of THE CAMERA by the Addre

11 IP Camera User’s Manual Speco Technologies 1.2.2. Camera Feature I. Intensifier Cameras (Not available with IP-T5) 1) SLC ( Speco Light Com

110 IP Camera User’s Manual Speco Technologies Fig. 5―21 Input User ID On user ID input Page [5-21], input user’s ID registered in ‘Use of Servi

111 IP Camera User’s Manual Speco Technologies Fig. 5―24 Pan/Tilt/Zoom Control It is available to see Image and control Pant/Tilt/Zoom/5

112 IP Camera User’s Manual Speco Technologies It shows the Sensor Name and current status ([Normal/Sensing]). 5.5.2. PDA(WinCE) Run ‘Intern

113 IP Camera User’s Manual Speco Technologies Fig. 5―27 Menu 5.6. Use of NVR Program 5.6.1. Required Specification of PC and OS Item Min.

114 IP Camera User’s Manual Speco Technologies 6. Network Environment

115 IP Camera User’s Manual Speco Technologies 6. Network Environment It is required to follow the recommendation of the environment where THE

116 IP Camera User’s Manual Speco Technologies  Web Connection Port : Port 80 TCP  Authentication and Control Port : Port 9000 TCP  Vide

117 IP Camera User’s Manual Speco Technologies 7. Appendix

118 IP Camera User’s Manual Speco Technologies 7. Appendix Appendix A Basic Setting Table Item Default (Basic Setting) Remarks Network Setting S

119 IP Camera User’s Manual Speco Technologies Appendix B Specification of Products B-1 IP-INTB1 / INTB2 Image Sensor 1/3" Sony Super HAD CC

12 IP Camera User’s Manual Speco Technologies 16) Camera OSD control with client program 17) Super Day/Night Function with Power Sensor-up engine

120 IP Camera User’s Manual Speco Technologies B-2 IP-INTD3 / INTD4 Image Sensor 1/3" Sony Super HAD CCD, 410,000 pixels NTSC 811(H)*508(V)

121 IP Camera User’s Manual Speco Technologies B-3 IP-INTT5 Image Sensor 1/3" Sony Super HAD CCD, 410,000 pixels NTSC 811(H)*508(V) Total Pi

122 IP Camera User’s Manual Speco Technologies B-4 IP-T5 Image Sensor 1/3" Panasonic CCD, 410,000 pixels NTSC 811(H)*508(V) Total Pixel PAL

123 IP Camera User’s Manual Speco Technologies B-5 IP-WDRB1 Image Sensor 1/3" Pixim ORCA CMOS(Dramatic Dynamic range sensor) NTSC Total Pixel

124 IP Camera User’s Manual Speco Technologies B-6 IP-SD10X Image Sensor 1/4" Sony Super HAD CCD No. of Pixel 768(H) * 494(V) 380K Horizon

125 IP Camera User’s Manual Speco Technologies Interface 10/100Mbps Current Users 20 Manual Yes Schedule Yes Motion Detection Yes Recording@PC

126 IP Camera User’s Manual Speco Technologies  Check with ‘C-1-2 Network Cable (LAN cable) and cable connection check’.  PING Test  In case C

13 IP Camera User’s Manual Speco Technologies 2. Install and Check Video

14 IP Camera User’s Manual Speco Technologies 2. Install and Check Video 2.1. Installation 1) Connect the IP Camera to the PC by LAN cable (Cros

15 IP Camera User’s Manual Speco Technologies 1) Set IP Address, Subnet Mask and Gate-way of User’s PC with 192.168.1.50, 255.255.255.0 and 192.168

16 IP Camera User’s Manual Speco Technologies Fig. 2―4 User login 4) Input ID and Password on [Fig. 2-4] to see Video. 5) User’s Authorit

17 IP Camera User’s Manual Speco Technologies Fig. 2―5 ActiveX Download 9) Upon installation, Web Viewer [Fig. 2-6] appears and the

18 IP Camera User’s Manual Speco Technologies 3. Basic Setting

19 IP Camera User’s Manual Speco Technologies 3. Basic Setting 3.1. Check Network and Installation Type This Chapter is for basic setting of

2 IP Camera User’s Manual Speco Technologies Introduction We appreciate your purchasing our IP Network Camera. This is a Network Camera with a bui

20 IP Camera User’s Manual Speco Technologies 3.2. Installation without IP sharing device (Router) 3.2.1. Static IP Setup 1) After checking Video

21 IP Camera User’s Manual Speco Technologies 6) Put ‘admin’ in ID and Password line, click ‘Login’, then [3-3] ‘Administrator's Page’ will b

22 IP Camera User’s Manual Speco Technologies Fig. 3―4 Network Setting 12) Click ‘Click Here’ upon appearing of IP Change Window of [3-5]. 13)

23 IP Camera User’s Manual Speco Technologies Fig. 3―6 IP Change loading Page 14) Remove LAN Cable (Cross Cable) connected between THE CAMERA a

24 IP Camera User’s Manual Speco Technologies 4) Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘Static IP Setup’

25 IP Camera User’s Manual Speco Technologies connect to THE CAMERA by Domain Name (Server Name) allocated to THE CAMERA. For example, run Web Brows

26 IP Camera User’s Manual Speco Technologies 7) DNS Address should be input. In case THE CAMERA is installed under IP Sharing Device,

27 IP Camera User’s Manual Speco Technologies Fig. 3―10 IP Change 11) It is connected to the new IP set up, in 20 seconds after window of

28 IP Camera User’s Manual Speco Technologies 14) Set Port in Port Setting Page of [3-12]. It is required to set each different Port for many TH

29 IP Camera User’s Manual Speco Technologies connect to THE CAMERA by Domain Name (Server Name) allocated to THE CAMERA. For example, run Web Brows

3 IP Camera User’s Manual Speco Technologies Important Notes  The Network Camera may be damaged by electrical and physical shock  Do not try

30 IP Camera User’s Manual Speco Technologies 4. Expert Setting

31 IP Camera User’s Manual Speco Technologies 4. Expert Setting After registration of THE CAMERA in Service Server (refer to ‘Use of Service Server

32 IP Camera User’s Manual Speco Technologies Fig. 4―2 Administrator’s Page

33 IP Camera User’s Manual Speco Technologies 4.1. General Setting Fig. 4―3 General Setting 4.1.1. Title Setting Fig. 4―4 Title Se

34 IP Camera User’s Manual Speco Technologies 4.1.2. Administrator’s ID and Password Change ※ Cautions : Change Administrator’s ID and Passw

35 IP Camera User’s Manual Speco Technologies Fig. 4―6 User Registration 4.1.4. User List and Delete Fig. 4―7 User List User list is availab

36 IP Camera User’s Manual Speco Technologies 4.1.6. Time Zone Setting This is to set Time zone of location where THE CAMERA is to be installed, t

37 IP Camera User’s Manual Speco Technologies 4.1.8. Select Language This is to select language to be displayed in all Web Pages such

38 IP Camera User’s Manual Speco Technologies 4.3. Video Setting Fig. 4―14 Video Setting 4.3.1. Video Setting Select and tick on the Chan

39 IP Camera User’s Manual Speco Technologies 4.4. Color Setting This is to adjust color of channel. Fig. 4―17 Display Color Setting Upon adj

4 IP Camera User’s Manual Speco Technologies Contents 1. FEATURE ... 8 1.1

40 IP Camera User’s Manual Speco Technologies Fig. 4―18 Alarm Setting Designate condition to drive Event in ‘Alarm Condition’, such as Sensor Ev

41 IP Camera User’s Manual Speco Technologies 4.5.2. Alarm Event Test Click ‘Test’ of [4-18], THE CAMERA will work as if Alarm has happened. In cas

42 IP Camera User’s Manual Speco Technologies  Remote Control: to control Relay through Internet using Viewer  Local Control: Relay is on

43 IP Camera User’s Manual Speco Technologies 4.8. Camera Setting(support for IP-SD10X) Fig. 4-20 Camera Setting It is available to pre-set Pan

44 IP Camera User’s Manual Speco Technologies 4.9. Homepage Update Fig. 4―21 Homepage Update Homepage Update function is for user to uplo

45 IP Camera User’s Manual Speco Technologies 4.10.1. Remote Upgrade Fig. 4―22 Firmware Update Address of ‘Update Server Address’ in [4-22] is s

46 IP Camera User’s Manual Speco Technologies Fig. 4―24 Firmware Download ‘Downloading’ message will be shown until completion of Update as [4-2

47 IP Camera User’s Manual Speco Technologies user keep finding [4-27] or can’t upgrade, contact head office of Speco Technologies Fig. 4―27 Upg

48 IP Camera User’s Manual Speco Technologies 4.11. Factory Reset 4.11.1. Reset Button Press reset button for 1sec to be operated.(Red Circle)

49 IP Camera User’s Manual Speco Technologies 5. Basic Use

5 IP Camera User’s Manual Speco Technologies 4.2. NETWORK SETTING ...

50 IP Camera User’s Manual Speco Technologies 5. Basic Use 5.1. Use of Web Viewer Fig. 5―1 Web Viewer Table. 5-1 Definition of Web Viewer Button

51 IP Camera User’s Manual Speco Technologies Relay ON Relay OFF Select Preset to control Select Tour to control Select Pattern to control M

52 IP Camera User’s Manual Speco Technologies Table 5-2 Definition of Web Viewer Key Board ②  ‘space ’Key’  Enlarge / reduce Screen ③  Nu

53 IP Camera User’s Manual Speco Technologies 5.2. Use of OSD (Not available with IP-T5) The OSD menu of this camera can be controlled by Web Viewe

54 IP Camera User’s Manual Speco Technologies 2) Speed Dome Camera (IP-SD10X) MAIN MENU DOME SETUP CAMERA SET AUTO SCAN TOUR PRAVACY PATTERN ALAR

55 IP Camera User’s Manual Speco Technologies 3) WDR Camera (IP-WDRB1) SPECO MAIN MENU PRESETS WDR WB CONTROL LOW LIGHT SPECIAL EXIT MENU DEFAULT

56 IP Camera User’s Manual Speco Technologies 5.2.2. OSD Menu Setting When you control the OSD by using the joystick on the camera, re

57 IP Camera User’s Manual Speco Technologies 5.2.3. Operating Camera OSD Menu (Intensifier Cameras) SET UP menu is displayed on the monitor s

58 IP Camera User’s Manual Speco Technologies 1) Setting up the LENS Select the lens pressing the RIGHT button. ① On the SETUP menu scree

59 IP Camera User’s Manual Speco Technologies ▶When DC LENS selected, press SET button to control the BRIGHTNESS.

6 IP Camera User’s Manual Speco Technologies 5.3. USE OF IP SETTING UTILITY...

60 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the setup menu and move the arrow indicator to ‘SHUTTER’

61 IP Camera User’s Manual Speco Technologies ▶MANUAL : When setting shutter speed manually. (Only for LENS mod

62 IP Camera User’s Manual Speco Technologies ▶ESC : You can control the BRIGHTNESS. ③When completed, press ‘SET’

63 IP Camera User’s Manual Speco Technologies ▶HIGH ▶MIDDLE ▶LOW ▶OFF ① Press the SET button to display the SETUP menu and move the arrow

64 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘AGC’ u

65 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHIT

66 IP Camera User’s Manual Speco Technologies ▶MANUAL : To fine adjust, select the Manual mode. You can increase or decrease the red or blue f

67 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘DNR’ usi

68 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘Intensi

69 IP Camera User’s Manual Speco Technologies 8) NEXT PAGE If the CAMERA ID feature is set to ‘OFF’, the name will not displayed in the monitor.

7 IP Camera User’s Manual Speco Technologies 1. Feature

70 IP Camera User’s Manual Speco Technologies If the CAMERA TITLE feature is set to ‘OFF’, the name will not displayed in the monitor. After era

71 IP Camera User’s Manual Speco Technologies B) COLOR You can choose color and B/W mode electronically. (OPTION) OSD Key may not wo

72 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the setup menu and move the arrow indicator to ‘SYNC’ usi

73 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the setup menu and move the arrow indicator to ‘PRIVACY’

74 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the setup menu and move the arrow indicator to ‘REVERSE’ u

75 IP Camera User’s Manual Speco Technologies ① Press the SET button to display the setup menu and move the arrow indicator to ‘DETAIL’

76 IP Camera User’s Manual Speco Technologies G) DEFAULT : Use to reset your camera to FACTORY DEFAULT SETTING. H) PAGE1 : PAGE 1 : Save the setti

77 IP Camera User’s Manual Speco Technologies 5.2.4. Operating WDR Camera OSD Menu (IP-WDRB1) OSD MENU CONTROL CENTER KEY - Used to access menu mo

78 IP Camera User’s Manual Speco Technologies - ON :The ID name will displayed in the monitor. - OFF : The name will not displayed in the mo

79 IP Camera User’s Manual Speco Technologies • SHARPNESS : ON (You can adjust the desired Sharpness form -8 to 8) or OFF

8 IP Camera User’s Manual Speco Technologies 1. Feature 1.1. Package Package of Products is composed of main body of product, Softwa

80 IP Camera User’s Manual Speco Technologies A. Dome Setup To enter Dome setup, use the five keys right to move when cursor on dome setup.

81 IP Camera User’s Manual Speco Technologies select ON or OFF. The default setting is OFF. A-5. DOME SET – ZOOM SPEED Zoom speeds are sele

82 IP Camera User’s Manual Speco Technologies 5.2.1. OSD MAIN MENU TABLE (PAGE 54) The default setting is BLANK. Press any number from 001~2

83 IP Camera User’s Manual Speco Technologies A-8-4. DOME SET – [NEXT PAGE] – [SYSTEM STATUS] This page shows the information of this ca

84 IP Camera User’s Manual Speco Technologies - To clear memorize any data, move five keys to the right direction when cursor is

85 IP Camera User’s Manual Speco Technologies A-9. DOME SET – [NEXT PAGE] – SAVE AND EXIT To saving the memorized data and escape this p

86 IP Camera User’s Manual Speco Technologies B-3. CAMERA SET – APERTURE Aperture enhances picture details by increasing gain of the caemra and

87 IP Camera User’s Manual Speco Technologies (10X Zoom) B-9. CAMERA SET – DSS MODE (DIGITAL SLOW SHUTTER) If DSS turns on, digital slow shutter is

88 IP Camera User’s Manual Speco Technologies C-3. PRESET – PAN: XXX.X TILT: XX.X Press FOCUS FAR button in order to set preset position then, us

89 IP Camera User’s Manual Speco Technologies right or left direction CW: Clock wise direction (Default) CCW: Count Clock Wise Direction. D-4. A

9 IP Camera User’s Manual Speco Technologies 1.2. Dimension and Camera Features 1.2.1. Dimensions 1) Bullet Camera 2) Dome Camera

90 IP Camera User’s Manual Speco Technologies E. TOUR SET 8 Programmable tours can be set and each tour is available to set up to 64 preset steps.

91 IP Camera User’s Manual Speco Technologies E-6. TOUR SET – SPEED Each tour step can be set with different tour speed up to 200°/S and it

92 IP Camera User’s Manual Speco Technologies To set the blocking area, press FOCUS FAR button when the MOVE MODE is appeared. Then

93 IP Camera User’s Manual Speco Technologies Up to 8 programmable user-defined patterns set by the five keys on the Webviewer GUI are avail

94 IP Camera User’s Manual Speco Technologies H. ALARM SET 4 Alarm inputs are available and each alarm is activating to presets, group tours or patt

95 IP Camera User’s Manual Speco Technologies * Before activating Alarm, user must set ALARM ENABLE at DOME SET – ALARM – ENABLE (Refer to page 15

96 IP Camera User’s Manual Speco Technologies I-4. SECTOR SET – SECTOR END To set SECTOR END angle, press FOCUS FAR button then move five keys t

97 IP Camera User’s Manual Speco Technologies 5.2.6. DIP SW SETTING Mini Speed Dome camera provides up to 63 camera ID and it’s adjustable ID with

98 IP Camera User’s Manual Speco Technologies 100010XXXX 17 111001XXXX 39 101111XXXX 61 010010XXXX 18 000101XXXX 40 011111XXXX 62 110010XXXX

99 IP Camera User’s Manual Speco Technologies 5.3. Use of IP Setting Utility Upon running IP Setting Utility, the following program is to be displa