Speco Technologies 4TL Manual do Utilizador Página 79
- Página / 108
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
TL H.264 DVR User’s Manual
78
Sensitivity
This item is used to set the sensitivity of detection grids for the camera. A
greater value indicates more sensitive motion detection. A motion alarm will
be triggered once the amount of motion detected exceeds the Threshold
value.
Move the cursor to <Sensitivity> and press ENTER, and then use UP/ DOWN
keys to adjust the value. The value is increased by 4% increment.
Block Threshold
<Block Threshold> indicates the motion alarm triggered level; select from <1>
to <16>. Selecting <1> means the DVR will trigger the alarm when one grid is
detected; and selecting <16> means the DVR will trigger the alarm when 16
grids are detected. Move the cursor to <Block Threshold> and press ENTER,
and then use UP / DOWN keys to adjust the value.
5.6.8.6 Alarm In
This item allows users to enable/ disable alarm input detection. According to
users’ application, select <N/O> (Normal Open) or <N/C> (Normal Close) to
enable the alarm input detection, or select <OFF> to disable the detection.
If <N/C> is selected without installing any device, an alarm will be triggered
and the Event Icon will always display on the monitor until the selection is
changed to <N/O> or <OFF>, or when a device is installed.
5.6.8.7 Alarm Out
This item allows users to enable/ disable the alarm output on the selected
channel to activate the relay. The signal can be a light or siren to caution an
alarm event. Select <ON> to enable the alarm output, or <OFF> to disable.
- Version 1.2 1
- Caution and Preventive Tips 3
- Important Information 4
- Rack Mounting 4
- Table of Content 5
- TL H.264 DVR User’s Manual 10
- 1. Overview 12
- 2. System Setup 13
- 3. General System Setup 16
- 3.1.2 Function Keys 17
- 3.2.1 User Management 20
- Shutdown 21
- 1. Power Off 21
- 2. Reboot 21
- Execute 21
- 3.4.1 Set Date / Time 22
- 3.5.1 Schedule Setup 25
- 4. Basic Operation 28
- 4.1.2 Digital Zoom 29
- 4.1.3 View Live Cameras 29
- 4.1.4 View Recorded Video 29
- 4.1.5 Capture Snapshots 30
- 4.2 Sequence 31
- 4.3 Search Recorded Video 32
- 4.3.2 Calendar Search 33
- 4.3.3 Search by Event 34
- 4.4 Video Export 35
- 4.4.2 Export Normal Video 36
- 4.5 Dome Control 37
- 4.5.2 Dome Protocol Setup 38
- 4.5.3 RS485 Setup 38
- 4.5.4 Dome Controlling Keys 39
- 4.5.5 Setting Preset Points 40
- 4.5.6 Calling Preset Points 41
- 5.1 System Setup 44
- Upgrade Version 45
- Select 45
- 5.1.2 Language 46
- 5.1.3 Date / Time 46
- 5.1.3.2 Time Zone 47
- 5.1.3.4 Date Display Mode 47
- 5.1.3.5 Time Display Mode 47
- 5.1.3.6 Date/Time Order 47
- 5.1.4 Unit Name 49
- 5.1.5 Show Unit Name 50
- 5.1.6 User Management 50
- 5.1.7 Network Setup 51
- 5.1.7.1 LAN Select 52
- 5.1.7.2 LAN Setup 52
- 5.1.7.3 Trigger Port 55
- 5.1.7.4 Email Address 55
- 5.1.7.5 SMTP Setup 55
- 5.1.7.6 DDNS Setup 57
- 5.1.7.7 UPnP Setup 59
- 5.1.8 RS485 Setup 60
- 5.1.9.1 Audio Output 61
- 5.1.9.2 Key Beep 61
- 5.1.9.3 Split Mode Audio 61
- 5.2 Monitor Setup 62
- 5.3 Camera Setup 63
- 5.3.4 Camera Title 64
- 5.3.5 Covert 64
- 5.3.6 Brightness 64
- 5.3.7 Contrast 64
- 5.4 Record Setup 65
- 5.4.1 Record Mode Setting 66
- 5.4.2 Schedule Setup 67
- 5.4.4.1 Camera Select 69
- 5.4.4.2 Normal PPS 69
- 5.4.4.3 Normal Qlty 69
- 5.4.4.4 Event Max PPS 69
- 5.4.5 ezRecord Setup 70
- 5.4.6 Circular Recording 71
- 5.4.7 Audio Recording 71
- 5.4.8 Purge Data 72
- 5.5 Sequence Setup 73
- 5.6 Event Setup 74
- 5.6.4 Email Attachment 75
- 5.6.5.3 Alert IP 76
- 5.6.5.4 Alert Port 76
- 5.6.5.5 Alive Interval 76
- 5.6.6 Email Full Screen 77
- 5.6.7 Event Duration 77
- 5.6.8 Per Channel Config 77
- 5.6.8.3 Motion Detect 78
- 5.6.8.5 Detection Config 78
- 5.6.8.6 Alarm In 79
- 5.6.8.7 Alarm Out 79
- 5.7 Database Setup 80
- 5.8 Configuration 81
- 5.8.2 Import Configuration 82
- 5.8.3 Export Configuration 82
- 5.8.4 Boot Log 83
- 5.8.5 Operation Log 83
- 5.9 Video Export 84
- 5.9.4 Select Events 85
- 5.9.2 Select Channel 85
- 5.9.3 From / To Time 85
- 5.9.5 Data Type 86
- 5.9.6 Export Format 86
- 5.9.7 Digital Signature 86
- 5.10 Shutdown 87
- 6.1 System Requirements 88
- 6.2.2 Install SpecoRemote 91
- 6.2.2.1 Login / Logout 92
- 6.3 Basic Operation 93
- 6.3.2 Instant Recording 95
- 6.3.3 Playback Video 96
- 6.3.3.3 Playback Controls 97
- 6.3.6 Take a Snapshot 98
- 6.3.7 Health Status 99
- Appendix A: Recommended HDDs 103
- DVR User’s Manual 108
Manuais e produtos relacionados com Gravadores de vídeo digitais (DVR) Speco Technologies 4TL
(2 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.066 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais